|
Windows 2000 ADSL Configuration |
| Enter your LAN configuration setup by clicking. . .
Start | Settings |  |
| Right click on "Local Area Connection" then select properties. | |
 |
| Select "Internet Protocol (TCP/IP)" then click properties (Note: We recommend removing the check from file and print sharing as a security measure). |
|
 |
| Enter the ADSL settings you receive from our ADSL coordinator. No field should be empty. Click on Advanced when done. |
|
 |
| The following screens are provided for reference only. We do not recommend changing these settings from their default values. |
|
| The values here should reflect your IP address and default gateway. | |
 |
| These values should refelect your DNS server entries. Make sure your check boxes agree with the ones shown. Also make sure impulse.net is listed as the DNS suffix. |
|
 |
| There should be no WINS address entries. The check boxes here do not affect your connection to us. |
|
 |
| The following two options can negatively impact your connectivity. Examine each one by selecting it then click properties. |
|
 |
| We do not support IPSEC. Make sure it is not selected. | |
 |
| IP filtering can also cut you off from the Internet. Use these settings only if you are knowledgable of TCP/IP. |
|
 |
| When you click OK to exit the advanced settings you may get this message. This is OK. Click YES to continue. |
|
 |
| Click OK again, then close the Network and Dial-up Connections window. If you need to configure a mail client go to our Screenshots page. Otherwise, you're finished! |